Description
8 individual inputs can be connected to the feedback module.
The feedback module can be connected to any command station that supports s88-N. Alternatively, a separate s88-N starting point can also be used. The connection between the command station and the feedback module is made using RJ45 connectors. You’ll find suitable s88-N cables in our Shop. Further feedback modules can also be connected. The maximum number of modules depends on the command station or the s88-N starting point.
Important: The s88-N feedback bus exists with a supply voltage of either 5 V or 12 V. We offer our feedback modules for both variants. Which variant is right for you depends on your command station or your s88-N starting point. Please select the desired variant from the drop-down menu! Here you’ll find a list of the s88-N voltages of various command stations.
The s88-N feedback bus also contains a track signal, called Raildata. This is not used by the JT Digital feedback module 02001, but is passed through so that other feedback modules in the same chain can use it.
You can optionally order a matching mounting kit (four screws and spacers) or a matching s88-N cable. Please download the instruction manual from our downloads page. If you would like a printed manual, you can select this before ordering.
The feedback module has an LED that shows whether it’s correctly supplied with power.
Please refer to the installation manual for further technical data and the timing data of the s88-N feedback module (Download).
Source of s88-N logo: http://www.opendcc.de/
