As soon as a vehicle draws current in any of the 16 monitored sections, the integrated current sensor detects the occupancy and reports it via the s88-N bus to your command station or your s88-N starting point. A separate current sensor module and additional wiring to the feedback module are no longer needed.<\/p>\n
The 16 outputs are divided into two groups (1\u20138 and 9\u201316), each with its own input. The groups can be run from different boosters or together from one supply. You set the sensitivity for each output individually with a potentiometer. The detector is connected like an s88-N feedback module via two RJ45 sockets: \u2018Richtung Zentrale\u2019 (towards the command station) and \u2018Weitere Module\u2019 (further modules).<\/p>\n
Note:<\/strong> The occupancy detector only works on digitally operated layouts; analogue operation is not supported. The current per group must not exceed 3 A, and short-circuit detection must be active on the command station or booster.<\/p>\n No. Current sensors and s88-N feedback module are already built into the module.<\/p>\n<\/details>\n Yes. The two groups 1\u20138 and 9\u201316 each have their own input and can be run from different boosters.<\/p>\n<\/details>\nFrequently asked questions<\/h2>\n
Do I also need current sensors or a feedback module?<\/summary>\n
Can I connect two boosters?<\/summary>\n