8 individual inputs can be connected to the feedback module.<\/p>\n
The feedback module can be connected to any command station that supports s88-N. Alternatively, a separate s88-N starting point can also be used. The connection between the command station and the feedback module is made using RJ45 connectors. You\u2019ll find suitable s88-N cables in our Shop. Further feedback modules can also be connected. The maximum number of modules depends on the command station or the s88-N starting point.<\/p>\n
Important: The s88-N feedback bus exists with a supply voltage of either 5 V or 12 V. We offer our feedback modules for both variants. Which variant is right for you depends on your command station or your s88-N starting point. Please select the desired variant from the drop-down menu!\u00a0Here<\/a>\u00a0you\u2019ll find a list of the s88-N voltages of various command stations. The s88-N feedback bus also contains a track signal, called\u00a0Raildata<\/em>.<\/em>\u00a0This is not used by the JT Digital feedback module 02001, but is passed through so that other feedback modules in the same chain can use it.<\/p>\n You can optionally order a matching mounting kit (four screws and spacers) or a matching s88-N cable. Please download the instruction manual from our downloads page. If you would like a printed manual, you can select this before ordering.<\/p>\n The feedback module has an LED that shows whether it\u2019s correctly supplied with power.<\/p>\n Please refer to the installation manual for further technical data and the timing data of the s88-N feedback module (Download<\/a>).<\/p>\n
\n<\/strong><\/p>\n